Clamping nut and centering of mini grinders with shaft M14. This nut allows the fastening of our fine cutting discs (T-07115 and T-07125) as well as other abrasion elements with a 22.2mm center hole. Distance between centers of orifice of 30mm. For its correct use with our key 000192
CODE |
Ø mm |
Thick H mm |
FIXATION |
thread |
OBSERVATIONS |
000132 |
40 |
36 |
|
M-14 |
Error, para-mini-amoladoras |
Clamping and centering nut for grinders with shaft M14. This nut allows the fastening of our fine cutting discs, as well as other elements of abrasion with a central hole of 22.2mm. Distance between centers of tightening hole 35mm. For correct use, check with our key 000190
CODE |
Ø mm |
Thick H mm |
FIXATION |
thread |
OBSERVATIONS |
000134 |
46 |
41 |
|
M-14 |
For grinders |
Mounting and centering nut for M14 axle grinders. This nut allows the fastening to machine of elements of abrasion and polishing with central orifice of 22mm + 0.2 with thickness greater than 20mm. Distance between clamping orifices 35mm. For your correct use, please check with our key 000190
CODE |
Ø mm |
Thick H mm |
FIXATION |
thread |
OBSERVATIONS |
000137 |
46 |
41 |
|
M-14 |
Neck length 20mm |
Wheel nut for M14 thread. This grinding seat part has a central hole for M14 and an outer diameter of 40mm The drawing plane has a width of 17mm-19mm and the conical centering diameter is 29.5mm to 32mm. The height of the piece is 14mm.
CODE |
Ø mm |
Thick H mm |
FIXATION |
thread |
OBSERVATIONS |
000135 |
40 |
17 |
|
|
para M-14 |
000136 |
40 |
19 |
|
|
para M-14 |